Why
use an Adjustable Pitch Propeller?
-
The desired RPM can be
obtained by adjusting pitch.
-
Pitch can be adjusted to
attain various flight parameters.
-
Engine “break-in” RPM
can be set by adjusting pitch.
-
The same propeller can be
used on different engines and airplanes by
changing pitch
-
Propeller blades can be
changed if a different diameter is required.
-
Eliminates the need to
purchase numerous propellers when testing
for optimum performance.
10
Reasons to choose SOLO G.A.P. PROPELLERS?
-
No calculations or
measurements when setting pitch.
-
Pitch adjustment is quick
and easy without removing the
propeller.
-
More than 25 degrees of
pitch adjustment.
-
SOLO propellers range
from 16 inch to 32 inch diameter.
-
SOLO propellers come in 2,
3 and 4 blade configurations and several
different blade profiles.
-
SOLO propeller blades can
be replaced individually if damaged.
-
All SOLO propeller blades
and hubs are interchangeable.
-
Extensive field testing
has proven that SOLO props are safe and
reliable.
-
All SOLO products are (in
stock and cut) shipped within 2 days of
payment, whenever possible.
-
Economical “factory
direct” pricing and shipping on all SOLO
products.
Solo
G.A.P. (Ground Adjustable Pitch) Propellers
NRG RESEARCH LTD. has developed a propeller
with all the advantages of variable pitch but
without the usual hassle of pitch adjustment.
The synchronized hub acts as the brain of the
unit doing all the pitch measurements and
calculations for you. It’s the first of its
kind in the Aviation Industry. To set pitch,
simply turn a dial the appropriate number of
units. This rotates the blades to the desired
pitch for the flight conditions of the day. A
quick reference PITCH CHART allows exact pitch
adjustment within the 25 plus degrees of pitch
change available. All calculations and
measurements are eliminated. Take a quick test
flight and then fine tune the pitch to achieve
the ultimate performance for your airplane.
Attaining optimum performance for any
engine-airplane configuration requires testing
propellers of various diameters, pitch settings
and even profiles. It takes both capital and
patience to find the prop that suits your
individual aircraft. After finding the best
match, the temperature, altitude, and flight
parameters of each day will continue to cause
your propellers effectiveness to vary. Don’t
sacrifice your engines potential by using an
inadequate propeller.
A
SOLO G.A.P. PROPELLER allows the same
propeller unit to be transformed to produce the
desired results for your airplane each day. A
fine pitch setting may be used for
circuits and aerobatics whereas a coarse pitch
can be set for speed and fluid flight. If a
different blade diameter or profile is desired,
blades can be purchased separately, allowing a
very economical solution to encompassing even
more variations within a single propeller unit.
The result is a propeller that is so diverse in
its application that it can provide anything
from proper engine break-in rpm, to an
extraordinary day of aerobatics in the field.
This
line of SOLO PROPELLERS comes in two, three
and four blade configurations with several
popular propeller blade profiles. Blade sizes range in diameter from
16” to 32”, are precision balanced and are
ready to fly. All SOLO props and hubs are
interchangeable with individual blade
replacement available. If a blade is damaged, a
single replacement blade can be purchased.
Our
propellers are designed to fit all “Large”
model airplanes with engine sizes from 1.0 cubic
inch (16.5 c.c.), to the largest model airplane
engines in today‘s market. Extensive field
testing has proven that SOLO PROPELLERS
are both effective and reliable
Top
|
